
650 x 650 Cabinet
CAB223452 650C Green – 2mm 4003 Grade Stainless steel
CAB223455 650C Green – 2mm Galvanised steel
CAB223452SD 650C Green – 2mm 4003 Grade Stainless steel
CAB223455SD 650C Green – 2mm Galvanised steel
****Cabinets can be painted in any colour requested****
Out-door Distribution Cabinets
Designed to meet the requirements of an exterior cabinet capable of mounting deeper 19″ equipment, with additional facilities for mounting electrical metering and power distribution equipment and backup batteries.
The cabinet measures 675x650x1320mm (WDH). The Double door version is equipped with doors front and rear for best possible access. The single door version has one door at the front of the cabinet. The doors open 180° and are hinged from the same side, allowing the unit to be mounted side on to walls adjacent to each other withough impeding cabinet access.
19″ mountings accomodate up to 20U of equipment and will accept 400mm long side rails, offering approximately 100mm in front of the frame and 500mm behind with a facility to provide mounting for electrical supply and meter and fuse boxes. Cable management is provided along the frame edge.
Space is available in the lower section of the cabinet for IPS batteries.
Ventilation and Cooling
Ventilation is via two louvred panels mounted in the lower section of the doors. The cabinets are supplied as standard with three thermostatically controlled fans in the roof to provide exhaust ventilation, typical cooling capacity approximately 80Watts per 1°C. All ventilation apertures are protected against vermin and insect access via fine mesh gauze.
Equipment Mounting (Blackboards)
Cabinets are supplied with our four post 19″ rack mount frame offering up to 20U capacity and includes integral cable management features in order to help keep cabling contained. A marine ply board is also supplied fitted in the side for mounting LED switchgear, pre treated for fire resistance to BS476 Part 7:1971.
Security
Each cabinet door is secured with a three point locking mechanism and security lock.
Installation
Cabinet is designed for surface mounting on a prepared platform. On commissioning it is recommended the interior of the plinth is sealed with Resin Pack 6B or equivalent for maximum weather and moisture resistance.
FACTFILE
Dimensions WDH (mm) | 675x650x1320 |
Bolt hole Pitch | 591×450 or 455×568 suits M20 bolts |
Frame Height | 20U |
Frame Depth | 500mm (nom) |
Front Frame Space | 100mm (nom) |
Standard Post Pitch | 400mm (front to rear) |
Side Backboard | 150×650 (125mm depth) |
Ventilation | Extraction 3 Fans, Vermin Proof lower vents |
Nominal Cooling | 80watts per 1°C |
IP weather rating | IP55 |
Weight | 125kg |