•
Home
•
Companies
•
Manufacturing
•
Industries
•
News
•
Case Studies
•
Contact
•
Materials
•
Design
•
Punching
•
Folding
•
Welding
•
Powder Coating
•
Finishing
•
Recruitment
Powder Coating
Powder coating is an ever more important form of product presentation. FDMS
offer a sheet metal powder coating service as part of the in-house finishing
techniques applied to the manufactured product.
With the aim to deliver meticulous product presentation throughout all order
specifications, powder coating is a popular method of achieving a smooth
protective finish.
Every aspect of steel fabrication finishing techniques are carried out in house
without the need for outsourcing. FDMS is therefore capable of substantiating the
high quality in sheet metal product finish and steel fabrication quality control.
FDMS Powder Coating Process
Prior to powder coating all steel product is treated in our On-line 3 stage de-
grease and iron Phosphate plant, the plant consists of stage 1, 40
0
degree
detergent hot wash and combined phosphate application, stage 2, cold rinse and
stage 3, second rinse and applied sealing agent. The products used during this
three stage treatment ensure the that components are prepared for powder
coating to the highest standards and not only offers a 300 hour proven salt spray
protection but assist with powder adhesion and application.
Enviromentally Friendly
This process is water based and total environmentally friendly, it also uses no
harmful chemicals nor generates any by-products and has no health and safety
related issues and being an automatic process does not require an operator once
switch on.
Powder is applied via the latest technology in paint application, this equipment
ensures an even coat of powder is applied to product each and every time with the
minimum of waste, it is fully programmable and once set for a product the
programme can be called upon for batch after batch ensuring repeatability of finish
regardless of day, date or operator.
Once powder has been applied it is cured though a three pass oven, this oven has
vast air movement which guarantee’s circulation of heat evenly around painted
product, offering an even and durable finish to the powder coated component once
it has complete its process cycle.
This combined pre-treatment fishing and curing plant has been automotive
approved and finishes goods to the highest standards.
> Home
> Powder Coating
> Design & Development
> Materials
> Punching Cell
> Folding
> Welding
> Powder Coating
> Finishing
> Recruitment
> Assembly
•
Assembly
Call: 01352 733373
© Fox Design & Manufacturing Services Ltd. All Rights Reserved.
Fox Design & Manufacturing
Services (FDMS)
Unit 37
Manor Industrial Estate
Flint
Flintshire
CH6 5UY
Country
t: 01352 733373
f: 01352 763377
Precision Sheet Metal Engineering
Operating capacity 24 hours a day
7 days a week.
offer a sheet metal powder coating service as part of the in-house finishing
techniques applied to the manufactured product.
With the aim to deliver meticulous product presentation throughout all order
specifications, powder coating is a popular method of achieving a smooth
protective finish.
Every aspect of steel fabrication finishing techniques are carried out in house
without the need for outsourcing. FDMS is therefore capable of substantiating the
high quality in sheet metal product finish and steel fabrication quality control.
FDMS Powder Coating Process
Prior to powder coating all steel product is treated in our On-line 3 stage de-
grease and iron Phosphate plant, the plant consists of stage 1, 40
0
degree
detergent hot wash and combined phosphate application, stage 2, cold rinse and
stage 3, second rinse and applied sealing agent. The products used during this
three stage treatment ensure the that components are prepared for powder
coating to the highest standards and not only offers a 300 hour proven salt spray
protection but assist with powder adhesion and application.
Enviromentally Friendly
This process is water based and total environmentally friendly, it also uses no
harmful chemicals nor generates any by-products and has no health and safety
related issues and being an automatic process does not require an operator once
switch on.
Powder is applied via the latest technology in paint application, this equipment
ensures an even coat of powder is applied to product each and every time with the
minimum of waste, it is fully programmable and once set for a product the
programme can be called upon for batch after batch ensuring repeatability of finish
regardless of day, date or operator.
Once powder has been applied it is cured though a three pass oven, this oven has
vast air movement which guarantee’s circulation of heat evenly around painted
product, offering an even and durable finish to the powder coated component once
it has complete its process cycle.
This combined pre-treatment fishing and curing plant has been automotive
approved and finishes goods to the highest standards.
> Home
> Powder Coating
> Design & Development
> Materials
> Punching Cell
> Folding
> Welding
> Powder Coating
> Finishing
> Recruitment
> Assembly
•
Assembly
Call: 01352 733373
© Fox Design & Manufacturing Services Ltd. All Rights Reserved.
Fox Design & Manufacturing
Services (FDMS)
Unit 37
Manor Industrial Estate
Flint
Flintshire
CH6 5UY
Country
t: 01352 733373
f: 01352 763377
Precision Sheet Metal Engineering
Operating capacity 24 hours a day
7 days a week.